Well, soon the smok tfv8 will avaliable on smokstore, today let’s study how to build your TFV8 RBA core.
V8 RBA is first RBA head for tfv8 cloud beast tank,18mm large deck, suitable for all types of material wires,pre-installed fused Clapton dual coils, resistance is 0.28ohm, recommend work at 50w to 140w. maybe the pre-installed coils not good for you, so if you want to change it, so how to rebuild it. only 8 steps to easy do it.
1.clean your hands first
2.taking the RBA apart
3.install the pre-made coil, place the coil between the posts and wrap the ends around the screws and tighten up. once in place, make sure the coil fixed in the center and lined up with the air hole, the coil can not touch the base.
4.position and cut the ends of wire off
5.cut a strip organic cotton and make sure not too much.
6.insert the cotton into the pre-made coils.
7.cut the cotton, make sure not too short and too long, length similar to the pre-made coil.
8.drip some e juice on the cotton and wet it, and wait 5minutes, that’s all, begin to enjoy your TFV8 vape experience.
Warning: the pre-made coil must be tested for resistance before fired on a device. and re-checked periodically to ensure the resistance remains the same.