In Stock
$52.60 $32.99 Sale -37% OFF
Reward Points: 33
-
+
  • Brand: Artery
  • Product Code: Pal II Pro

The Artery Pal 2 II Pro Pod System, which is the upgraded version of the Pal 2 Pod Kit. the Artery Pod Kit with the square ergonomically design, picture printing glass panels design for a unique and fresh appearance. the Pal 2 Pro Kit with invisible Pod design, the Refillable Pod can hold 3ml e-juice, with the dual slotted coil-based airflow control ring to adjust the intake air freely, the Pal II Pod with convenient side e-juice refill design, simply pull out the back cover and pull up the rubber plug to reveal the large filling hole, easy to inject your favorite e-juice without leaking. there are two new coil heads available: the 0.6ohm HP mesh coil and 1.0ohm regular coil, vapers can use them for the sub-ohm vaping or MTL vaping. the chipset will remember the wattage setting of the HP Coil heads when you replace them. the Artery Latest Pod System built-in 1000mah battery and max output 22watts, the OLED display will show you the vaping data clearly, can use the UP/DOWN buttons to adjust the working wattage. you can charge the built-in battery via the micro USB port, the mac 800mAh charging current will ensure the battery be fully charged in a short time. the multiple protection functions to ensure the vaping and charging reliable.


Features:

  • Material: 6063 Aluminum
  • Size: 83*43*19mm
  • Colors: Black Diamond, Gun-Metal Diamond, Monster Squad, Dazzle Rainbow, Black Carbon Fiber
  • Output Wattage Range; 5-22W
  • Built-In 1000mAh Battery
  • Resistance Range: 0.5-2.0ohm
  • OLED Display
  • Intelligent LED Indicator Light
  • Max Charging Current: 800mAh
  • Magnetic Pod Panel
  • Micro USB Port For Charging
  • Over-Charge Protection
  • Over-Heat Protection
  • 8 Seconds Cut-Off
  • Short Circuit Protection
  • ----------------------------------------------------
  • 3ML Refillable Pod
  • Convenient Side E-Juice Refill Design With Silicone Stopper
  • Compatible With Artery Pal 2 Pod System
  • 0.6ohm HP Mesh Coil, Max Output Wattage 22W
  • 1.0ohm HP Regular Coil, Max Output Wattage 13.5W
  • Dual Slotted Bottom Adjustable Coil Based Airflow Control Ring


Includes:

1*PaL 2 Pro Pod Kit

1*Extra Coil

1*USB Cable

1*User Manual

1*Extra Plug

2*O-Rings

1*Warranty Card

1*Certification Card

Note: please ensure you have basic knowledge on how to properly to use it.

1)If the tanks use sub-ohm coils, vapers must be sure that your device and batteries can handle sub-ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub-ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage. use the OHMS LAW Calculator to check. if you have a question, please feel free to contact us.

2)users need to pay attention to Li-ion cells when vaping. the batteries very sensitive to charging characteristics and may explode or burn if mishandled. so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave a charging battery unattended. we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers. the device always recommends work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.

3) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods. please have a basic knowledge of batteries. Welcome to contact us anytime to get help.

Write a review

Note: HTML is not translated!
Bad           Good