The CETO mesh coil RDA is the first mesh rebuildable RDA by Cthulhu company, made of good grade 304 stainless steel material, black and silver colors available, diameter 24mm with deep juice well, comes with innovative elongated two post design with clamp mechanism to lock the piece mesh,the internal chamber is widely spacious,integrating two elongated posts designed to properly secured the mesh material with a clamp mechanism.once the mesh coil placed between the clamp posts to create around space for wick,vapers can insert the organic cotton inside, make sure to saturate the cotton before use.it will produce a large cloud of vapor and good flavor to you.the new Cthulhu RDA also comes with squonk BF pin, providing a bottom-feeding mechanism for convenient refill method. the CETO RDA with two airflow adjustable slots, provide smooth airflow into the tanks .the 810 Ultem drip tip included, for better heat-resistant, the 510 drip tip adapter included, vapers can install the 510 drip tips on it easily. please make sure cotton touch every point of the mesh and sticks out over the top of the mesh,6-12mm with mesh recommend works between 70-120w, the CETO mesh RDA also work well with temp control mode.
check the vandyvape mesh vape coils here
- Material: 304 stainless steel
- Colors: black, silver
- Diameter: 24mm
- Elongated two post design
- Deep juice well
- Clamp post mechanism properly secure mesh sheet
- Lockdown via two Phillips screws per post
- Max mesh width 10mm
- Triple adjustable side air slots
- Central filling port
- Extended 510 squonk-Bottom feeding pin
- 810 Ultem wide drip tip included
- 510 drip tip adapter
2*300 mesh pad(304 SS)
Note: please ensure you have basic knowledge on how to properly to use it.
1)If the tanks use sub ohm coils, vapers must be sure that your device and batteries can handle sub ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub ohm tank. the tank only work with the mod that can support the atomizer and coil.if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm.improper use and lead to injury or damage.use the OHMS LAW Calculator to check.if you have question,please feel free to contact us.
2) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of vape.welcome to contact us anytime to get help.