|Type||Temp Control Mod|
|Color||Black, White, Silver, Grey, Pink|
eleaf pico is newest temp control mod, the new TC mod made of stainless steel, max output 75watts,
support resistance as low as 0.05ohm, different output modes avaliable: VW, Bypass, TC(NI, TI, SS, TCR-M1, M2, M3).
temp control range from 100 degrees to 315 degrees. with 510 spring thread, fit most of 510 tanks.
eleaf istick pico mod powered by one piece 18650 battery. the ventilation holes at the bottom of the pico mod
for better heat dissipation and adjustment buttons are located at the bottom too. you can charge
the 18650 battery via the micro USB port of eleaf pico TC mod. the firmware can be upgraded by
connecting the device with a computer through the USB port via micro USB cable.
Link: eleaf pico vape kit
1*eleaf pico tc mod
Note: please ensure you have basic knowledge on how to properly to use it.
1)users need pay attention to Li-ion cells when vaping.the batteries very sensitive to charging characteristics and may explode or burn if mishandled.so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave charging battery unattended.we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers.the device always recommend work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.
2) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of batteries.welcome to contact us anytime to get help.