Pre-Order
$75.00
Reward Points: 75
-
+
  • Brand: Freemax
  • Product Code: Conqueror

Description:

Newest freemax conqueror 80w full vape kit include conqueror mod and Firelord tank. the conqueror mod made of resin material, stainless steel construction, powered by 1pc 18650 battery and max output 80watts. the freemax TC box mod supports resistance as low as 0.05ohm, under temp control working mode it supports NI200, TI and stainless steel vape wires, built-in large OLED screen, will show you the vaping data clearly, all the buttons and port on the side of conqueror mod, all the buttons with ergonomic design, better hand feeling, vapers can use the micro USB port to charge your mod or upgrade the firmware. the tank can hold 2ml e juice, comes with kanthal coils, ceramic coils and support RTA core. the Firelord tank comes with three different sub ohm coil heads, FLK-0.25ohm, FLK-0.5ohm, and FLC-0.5ohm coil heads can fire up to 60watts, which bring you better taste and the huge cloud of vapor.

check the conqueror resin TC box mod here

 

Features of conqueror mod:

  • Material: Stainless steel + resin
  • Size: 89.2*42.8*25mm
  • Max output wattage: 80W
  • Thread: 510
  • Battery: 1pc 18650
  • Resistance range: 0.05-3.0ohm
  • Thread: 510
  • Large OLED screen
  • Micro USB port
  • Large OLED screen
  • Locking wattage/voltage
  • Switching LED orientation
  • Automatic cutoff
  • Low voltage protection
  • Short circuit protection
  • Overheat protection
  • Auto power down

 

Features of Firelord tank:

  • Material: Stainless steel + pyrex glass
  • Capacity: 2.0ml
  • Min coil resistance: 0.05ohm
  • Top refill design
  • Bottom airflow adjustable design
  • Kanthal coil,ceramic coil and RTA core available
  • FLK-coil 0.25ohm, 20-60W
  • FLK-coil 0.5ohm, 20-50W
  • FLC-coil 0.5ohm, 20-50W
  • Thread: 510

 

Package:

1*conqueror 80w mod

1*firelord tank

1*USB cable

1*extra glass tank

1*user manual

1*warranty card

Note: please ensure you have basic knowledge on how to properly to use it.

1)If the tanks use sub ohm coils, vapers must be sure that your device and batteries can handle sub ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub ohm tank. the tank only work with the mod that can support the atomizer and coil.if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm.improper use and lead to injury or damage.use the OHMS LAW Calculator to check.if you have question,please feel free to contact us.

2) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of vape.welcome to contact us anytime to get help.

Write a review

Note: HTML is not translated!
Bad           Good