In Stock
$32.99
  • 25 or more $32.34
  • 50 or more $30.61
Reward Points: 33
-
+
  • Brand: Joyetech
  • Product Code: Cuboid 200w
Description:

Newest joyetech temp control mod cuboid 200, with glossy zinc alloy shell, three different colors avaliable, powered by three pieces 18650 high drain batteries, max output 200watts, the joyetech cuboid 200w with 0.96inch clear and large OLED screen, support VT, VW and TCR output modes, support NI, TI, SS316 vape wires or coils, support resistance as low as 0.05ohm, the new joye mod support real-time clock function, the flexible battery cover enables to replace batteries with great ease. the onboard reverse polarity protection, as applied in the cuboid 200 mod, protect the device from damages in the event of reverse battery installation, the dual circuit protection, realizing overall battery protection of over-charging, over-current and over discharging. this moment joyetech bring vapers the newest preheat function for advanced vaping, which allows the device to start at a high output for a few seconds to warm up, especially an essential when using an RDA, RTA or ceramic coils. the firmware of cuboid 200w upgradable. we always suggest vapers to take out the batteries and charge them in a standalone charger.


Features:

  • Material: Glossy zinc alloy
  • Size: 99*63*22mm
  • Colors: Black, Grey, Silver
  • Output modes: VW, VT(NI, TI, SS316)/TCR
  • Output: 1-200W
  • Resistance support: 0.05-1.5ohm(VT/TCR)/0.1-3.5ohm(VW)
  • Battery: 3pcs 18650
  • Screen: 0.96inch OLED clear screen
  • Flexible battery cover
  • Reverse polarity protection
  • Dual circuit protection
  • Fashionable preheat function
  • Firmware upgradeable

 

Package:

1*cuboid 200w mod

1*USB cable

1*Warranty card

1*User manual

Note: please ensure you have basic knowledge on how to properly to use it.

1)users need pay attention to Li-ion cells when vaping.the batteries very sensitive to charging characteristics and may explode or burn if mishandled.so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave charging battery unattended.we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers.the device always recommend work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.

2) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of batteries.welcome to contact us anytime to get help.

Write a review

Note: HTML is not translated!
Bad           Good