The MAG P3 230W Smok Touch Screen Mod, which is the newest member of Smok Mag Series. constructed with a backside carbon fiber panel which manifests the high-level of craftmanship. it adopts one large 1.9 inch responsive touch screen, with the new user interface, easy to operate and use. the Smok Mag P3 Box Mod with the similar box mod style design like other Mag Mods, with the IP67 Waterproof, dustproof and shockproof features, more durable than other Smok Mods. it powered by dual high-rate 18650 batteries and max output 230watts, various working modes available, supports Ti, Ni, SS heating elements and TCR function under temp control mode, it supports resistance as low as 0.05ohm. with the advanced IQ-M chipset, allows the firing speed low to 0.001S, more stable, safer and faster. the left side of the MAG P3 adopts the exquisite small trigger-style fire key, you can press the triggering button easily. the Smok Touch Screen Mod supports slide-to-unlock function, like a phone to unlock your Vape Mod. in the case of the screen lock, move the arrow to the right, the screen unlocked. it with the input keyboard function that provides password protection to unlock the device.
- Size: 91.6*72.3*36mm
- Colors: Black Red, Green Black, Gray Black, Red Black, Blue Black
- Built-in Smart IQ-M Chipset
- Powered By Dual High-Rate 18650 Batteries( Sold Separately )
- Output Power Range: 1-230W( VW ) / 10-230W( TC )
- Working Modes: VW( Soft, Norm, Hard), TC( Ti, Ni, SS, TCR )
- Resistance Range: 0.1-2.5ohm( VW ) / 0.05-2.0ohm( TC )
- Temperature Control Range: 100-315℃ / 200-600℉
- Input Voltage: 6.4-8.4V
- Output Voltage: 0.5-8.2V
- Firing Speed: 0.001S
- Charging Voltage: 5V
- Charging Current: 1.8A
- Standby Current: <400uA
- 1.9 inch HD Touch Screen
- Slide-To-Unlock Function
- Trigger-Style Exquisite Small Fire Key
- Micro USB Port For Charging And Firmware Upgrading
- IP67 Waterproof / Dustproof / Shockproof Protection
- Input Keyboard Password Protection
- Intelligent Atomizer Recognition
- Puff Monitoring System
- 10 Seconds Cut-Off
- Short Circuit Protection
- Over-Heating Protection
- Low-Battery Warning
1*Smok MAG P3 Box Mod
Note: please ensure you have basic knowledge on how to properly to use it.
1)users need to pay attention to Li-ion cells when vaping. the batteries very sensitive to charging characteristics and may explode or burn if mishandled. so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave a charging battery unattended. we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers. the device always recommends work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.
2) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods. please have a basic knowledge of batteries. Welcome to contact us anytime to get help.