+
+
+
+
+
The Oukitel Bison is the first pod system with HD LED screen in the world, the body made of metal and DuPont Kevlar material and has the soft touch and shows different states from any angles. the Bison Kit built-in 1000mah battery and max output power 30watts can charge via the micro USB port, it will fully be charged in 1hour. the Oukitel Kit with the automatic defection design, after replacing the atomizer and automatically match the relevant mode from Nic Salts, CBD, and Power(Regular E-Juice). there is an HD LED screen on the front panel, it will show you the vaping time, working mode, working voltage, and resistance clearly. the Bison Pod can hold 2ml e-juice and with convenient top e-juice refill design. simply screw out the top cap and inject your favorite e-juice without any leaking. there are two replacement coils available: the 1.2ohm ceramic coil and 0.6ohm mesh coil. the ceramic coils optimized fo nicotine salts and CBD, will bring you the intense flavor. the mesh coil optimized for regular e-juice will deliver the large cloud of vapor.
Features:
- Material: Metal + Resin + Kevlar
- Colors: Prism Rainbow, Bright Black, Prism Gold
- Size: 93*38*15mm
- 10-30W Output Power Range
- Built-In 1000mAh Battery
- Automatic Detection Mode(Nic Salt / CBD / Power)
- Working Voltage: 3.0-4.2V
- HD LED Screen
- Micro USB Port For Charging
- Intelligent Pod Recognition
- 8 Seconds Cut-Off
- Low Battery Protection
- -----------------------------------
- 2ML Refillable Pods
- Coils:
- 1.2ohm Ceramic Coil For Nic Salts Or CBD
- 0.6ohm Mesh Coil For Regular E-Juice
- Convenient Top E-Juice Refill Design
Includes:
1*Bison Battery
1*Bison Pod
1*1.2ohm Ceramic Coil
1*0.6ohm Mesh Coil
1*USB Cable
1*Lanyard
1*User Manual
Note: please ensure you have basic knowledge on how to properly to use it.
1)If the tanks use sub ohm coils, vapers must be sure that your device and batteries can handle sub ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage.use the OHMS LAW Calculator to check.if you have a question, please feel free to contact us.
2)if the coils are sub ohm coils, the user should be sure that the tank and mods can handle the sub ohm resistance coils, please make sure you have the great understanding of them, if you are not sure, please do not order and use, welcome contact us any time to get help.
3)users need to pay attention to Li-ion cells when vaping. the batteries very sensitive to charging characteristics and may explode or burn if mishandled. so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave a charging battery unattended. we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers. the device always recommends work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.
4) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods. please have a basic knowledge of batteries.welcome to contact us anytime to get help.
