Pre-Order
$97.30 $63.00 Sale -35% OFF
Reward Points: 63
-
+
  • Brand: Vandyvape
  • Product Code: Pulse X Special Edition

The Vandy Vape Pulse X Squonk Kit Special Edition, it has 17 fashionable colors available, the new Vandyvape Squonk Kit includes the Pulse X Squonk Mod and Pulse V2 RDA. the Pulse X mod with compact structure, it built-in the highest stability of the Vandy chip, which consists of top-grade IC at affordable costs, it will provide the rapid firing and precise output. the Vandyvape Mod powered by single 18650 / 20700 / 21700 battery and max output 90watts, the working mode switchable from TC, Bypass, Voltage, VW. it supports resistance as low as 0.05ohm, allow it can work with most of BF Rebuildable tanks. the Pulse X with replaceable panels with magnetic structure design, vapers can replace the battery simply, the pulse X built-in 7ml e juice squonk bottle. the Pulse V2 RDA can hold 2ml e juice, with fully upgrade airflow design, three adjustable airflow rings included, supporting single or dual coil building, two of them with honeycomb airflow, and one wide open, directing airflow directly to the coils. the Vandy BF RDA with a floating deck, with top squonk feeding and bottom juice return design, it will bring you the better vaping experience. 


Pulse X Squonk Mod Features:

  • Colors: Red Pomegranate, Golden Agate, Lava Red, Fantastic Blue, Seaweed Green, Aurora Rainbow, G10 Black, G10 Red, Silver Balck(Carbon Fiber), Full Black(Carbon Fiber), Kill Devil Hills, Kitty Hawk, Frosted Black, Frosted Green, Frosted Cyan, Frosted Amber, Frosted Red
  • Size: 82.6*54.8*27mm
  • 5-90W Output Wattage
  • Powered By Single High Rate 18650 / 20700 / 21700
  • TC, BP, V, VW Working Modes Switchable
  • Standby Current: <30uA
  • 0.5-8.5V Output Voltage
  • Resistance Range: 0.05-3.0ohm(VW) / 0.05-1.5ohm(TC)
  • Temperature Control Range: 100-315℃/200-600℉
  • 0.91 Inch OLED Screen
  • Highest Stability Vandy Chipset
  • Replacement Battery Panel With Magnetic Structure Design
  • Built-In 8ML Squonk E Juice Bottle
  • Over Heating Protection
  • Open Circuit Protection
  • Short Circuit Protection
  • Over Current Protection
  • Over Time Protection
  • Low Battery Protection
  • Micro USB Port For Firmware Upgrading / Battery Charging


Pulse V2 RDA Features:

  • Material: Stainless Steel
  • Colors: Matte Black, Rainbow, Stainless Steel, Gun-Metal
  • Size:32.4*24mm
  • 2ML E Juice Capacity
  • All Parts Attachable And Reassembled
  • Fully Upgraded Airflow, Three Adjustable Airflow Rings Included
  • Airflow Directs Onto The Coil
  • Top Squonk Feeding, Bottom Juice Return
  • Anti-Leaking Design
  • Dual And Single Coil Building Floating Deck


Includes:

1*Pulse X Squonk Kit Special Edition With Pulse V2 RDA

1*8ML Squonk E Juice Bottle

1*QC USB Cable

1*User Manual

1*18650 Battery Adapter

1*Accessories Bag

1*Airflow Cap

2*Coils

Note: please ensure you have basic knowledge on how to properly to use it.

1)If the tanks use sub ohm coils, vapers must be sure that your device and batteries can handle sub ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub ohm tank. the tank only work with the mod that can support the atomizer and coil.if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm.improper use and lead to injury or damage.use the OHMS LAW Calculator to check.if you have question,please feel free to contact us.

2)if the coils are sub ohm coils, the user should be sure that the tank and mods can handle the sub ohm resistance coils, please make sure you have the great understanding of them, if you are not sure, please do not order and use, welcome contact us any time to get help.

3)users need pay attention to Li-ion cells when vaping.the batteries very sensitive to charging characteristics and may explode or burn if mishandled.so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave charging battery unattended.we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers.the device always recommend work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.

4) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of batteries.welcome to contact us anytime to get help.

Write a review

Note: HTML is not translated!
Bad           Good