Wismec EXO skeleton ES300 is the newest wismec company vapor starter kits, the new wismec es300 kit includes ES300 mod and kage tank, three fashionable colors switchable. the es300 mod with a top 0.66inch OLED screen, user-friendly interface, will show vapers the basic vaping data. max output 300watts, with two batteries, max output is 200w, if installed 3pcs 18650 batteries, the max output can reach 300watts. the new wismec temp control box mod with creative LED light for visual enjoyment, makes your mod much charming and fashionable, bringing much visual enjoyment. the innovative design features the polygonal appearance and transparent body, allowing you to view the internal structure clearly. the decorative cases of wismec es300 are replaceable, by unscrewing the screws, vapers can replace a different case quickly and easily. the flip-open cover with ventilation holes is designed for easier cells replacement and better heat dissipation. the kit comes with QC USB cable, can support 2A max charging current, will get fully charged quickly. the application of buck-boost technology makes the steadier power output possible, balance charge system brings the cells to an equal charge level, making it much safer while charging.
The wismec kage tank can hold 2.8ml e juice, comes with brand new WT series coils will provide optimal flavor and the huge cloud of vapor. the WT-H2 0.4ohm coil best works between 50 to 70W, brings vapers RDTA vapor feeling, the WT-V3 will produce massive clouds under high wattage, best works between 110w to 130w. the retractable top fill system and creative childproof lock system allow vapers to inject the e juice quickly and avoids any unintentional push effectively. bottom airflow control for huge vapor can adjust the airflow to your preference by turning the control ring only. the detachable structure for easy cleaning and quickly replace the coil heads.
Features of EXO skeleton ES300 vapor mod:
- Size: 86*49.7*50.7mm
- Colors: Blue, Red, Silver
- Output wattage: 1-200W(2pcs 18650)/1-300W(3pcs 18650)
- Output modes: VW/TC-NI/TC-TI/TC-SS/TCR
- Input voltage: DC5V
- Output voltage: 0.5-9.0V
- Resistance range: 0.05-1.5ohm(TC)/0.1-3.5ohm(VW)
- Temp control range: 100-315C/200-600F
- Max charging current: 2A
- Max output current: 50A
- Thread: 510
- Unique transparent body
- The top 0.66inch OLED screen
- Interchangeable EXO skeletons
- Innovative buck-boost technology
- New balance charge system
- Dual circuit protection
- Reverse polarity protection
- Can be used as one power bank
- Firmware upgradeable
Features of kage tank:
- Size: 55.1*28mm
- Capacity: 2.8ml
- WT-H2 0.4ohm coil head(30-90w, best 50-70w)
- WT-V3 0.17ohm coil head(80-220w, best 110-130w)
- Intuitive slide TOP liquid with creative child lock system
1*WT-H2 0.4ohm coil
1*WT-V3 0.17ohm coil
1*QC USB cable
Note: please ensure you have basic knowledge on how to properly to use it.
1)If the tanks use sub ohm coils, vapers must be sure that your device and batteries can handle sub ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub ohm tank. the tank only work with the mod that can support the atomizer and coil.if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm.improper use and lead to injury or damage.use the OHMS LAW Calculator to check.if you have question,please feel free to contact us.
2)if the coils are sub ohm coils, the user should be sure that the tank and mods can handle the sub ohm resistance coils, please make sure you have the great understanding of them, if you are not sure, please do not order and use, welcome contact us any time to get help.
3)users need pay attention to Li-ion cells when vaping.the batteries very sensitive to charging characteristics and may explode or burn if mishandled.so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave charging battery unattended.we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers.the device always recommend work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.
4) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of batteries.welcome to contact us anytime to get help.