In Stock
$39.95 $29.99 Sale -25% OFF
Reward Points: 30
  • Brand: Wotofo
  • Product Code: Profile RDTA

The Wotofo Profile RDTA, which is the RDTA version of the popular Profile RDA, with improved juice transfer from bottom to top by using 4 stainless steel wicks, can be used with single mesh coil or single regular wire coil setup, and the dual wire coil setup available. the diameter is 25mm, can hold 6.2ml e-juice, the bottom section built-in 4PCS rope shape stainless steel wicks, which has the super-strong wicking capability to make e-juice from the bottom of the tank up along its length efficiently and gives automatic juice supply to the cotton, the juice transfer method makes large tank capacity viable in reality and cuts the hassle of frequent refills. you can refill the RDTA from the mid filling port or bottom squonking. On the side with the honeycomb air intake adjustable design, you can rotate the top cap to adjust the intake air freely for smooth and stabilize air. the Profile RDTA with the smart postless clamping building deck, you could easily drop single or two 3mm-ID wire coils on the deck, the building deck also supports the single mesh style coil. you can change the RDTA to RDA easily, find the RDA adapter in the package, detach the tank section, screw the adapter onto the deck bottom, choose the solid pin or the squonk pin, then you will get one new Profile RDA.

Profile RDTA Features:

  • Tube Material: PCTG
  • 810 Drip Tip Material: Colored Resin + Metal Ring
  • Insulator Material: German Peek
  • Colors: Stainless Steel, Gun-Metal, Black, Blue, Gold, Rainbow
  • Size: 52.7*25mm(Without 510 Pin)
  • E-Juice Capacity: 6.2ml
  • Building Deck Diameter: 22.5mm
  • Supported Coil Type: Single Mesh Coil, Single/Dual Regular Wire Coils
  • Output Wattage Range: 60-80W(Recommended: 70-75W)
  • Smart Postless Clamping Building Deck
  • Filling Method: Mid Filling/BF Squonk
  • Side Honeycomb Airflow Adjustable
  • 510 Thread


1*Wotofo Profile RDTA

1*nexMesh Clapton NI80 +Kanthal A1 Coil 0.2ohm

1*nexMesh Extreme Kanthal A1 Coil 0.16ohm

1*nexMesh Turbo Kanthal A1 Coil 0.13ohm

2*Framed Staple Clapton NI80 Coil 0.33ohm

2*6mm Thick Cotton Strip

2*3mm Thick Cotton Strip

6*Stainless Steel Wick(4 Pre-installed + 2 Spares)

1*Coil Trimming Tool

1*Mesh Bending Tool

1*RDA Adapter

1*Cross Head Screwdriver

1*Allen Key

1*Accessory Bag

1*User Manual

Note: please ensure you have basic knowledge on how to properly use it.

1)If the tanks use sub-ohm coils, vapers must be sure that your device and batteries can handle sub-ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub-ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage. use the OHMS LAW Calculator to check. if you have a question, please feel free to contact us.

2) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods. please have a basic knowledge of vape. Welcome to contact us anytime to get help.

Write a review

Note: HTML is not translated!
Bad           Good