+Features:
The RBA core for TFV8 Baby Tank and TFV8 Big Baby Tanks, features the velocity style dual post deck supports single coil or dual coils building, pre-installed 0.3ohm Clapton Coils, will bring you the unique vaping taste, you can rebuild your own coil and wick on the RBA core for the great flavor and vapor production comes with extra screws, O-Rings and glass tube. the extra glass tube only compatible with the Baby Beast only.
- Material: 304 Stainless Steel
- Velocity Style Dual Post Deck
- Supports Single Coil Or Dual Coils Building
- Pre-installed 0.3ohm Clapton Coils(Fe-Cr And Nickel-Chromium Material)
How to build the RBA:
- 1. Clean your hand first.
- 2. Take RBA deck out.
- 3. Install the pre-made coil, place the coil between posts and wrap the ends around the screws and tighten up, make sure the coils are fixed in the center and lined up with the air hole, make sure the coil is not touching the base.
- 4. Cutting the ends of the wire
- 5. Cutting a strip of organic cotton and make sure not too much and too short.
- 6. Inserting the cotton, placing it in the middle.
- 7. Cutting the cotton at an angle and make sure it's not too short and not too long.
- 8. Before fire up, drop some e-juice on it.
Package:
1*RBA core for TFV8 Baby & TFV8 Big Baby
1*Extra Pyrex Glass Tube
1*O-Ring
4*Screws
1*Allen Key
Note: please ensure you have basic knowledge on how to properly use it.
1)if the coils are sub-ohm coils, the user should be sure that the tank and mods can handle the sub-ohm resistance coils, please make sure you have a great understanding of them, if you are not sure, please do not order and use, welcome contact us any time to get help.
2)Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods. please have a basic knowledge of batteries. Welcome to contact us anytime to get help.
