The Aspire Spryte is the newest AIO vape kit with pod system, with slim and stylish design, it fits well in pocket or purse and the protective top cap fits snugly on to the bottom of the device when in use. 5 fashionable colors available. the pod can hold 3.5ml(standard version),it's bottom filling using a simple but effective silicone plug in the base of the pod, with a generous 4.6mm filling hole, to suit most of e juice bottles, with adjustable airflow system to suit your vaping preference, vapers only rotate the airflow adjustable ring to adjust the airflow. the spryte vape kit comes with 1.8ohm standard BVC coil head and 1.2ohm nic salts BVC coil head, both of them easy to install, simply remove the pod and turn it upside down, remove the chimney unit and screw in your chosen coil, replace the chimney unit with attached coil and reinsert into the pod, after installed the coil heads, please let the device stand for 5mins to allow the coil to become saturated, this will help avoid dry hits and damage to the coil. the aspire spryte kit with micro USB port, vapers can use it to charge your vape kit. when fully charged the LED indicator will flash blue and red twenty times then remain off.
Aspire Spryte Pod AIO Vape Kit Features:
- AIO Pod System Vape Kit
- Colors: Black, Blue, Purple, Grey, Olive Grey
- Size: 108*26*26mm
- Pod Capacity: 3.5ml/2.0ml
- Max Output Wattage: 12W
- Battery: Built-in 650mAh Battery
- Pod With Airflow Adjustable Design
- Comes With 1.8ohm Regular BVC Coil Head And 1.2ohm Coil Head For Nic Salt
- 4.6mm Diameter Filling Hole
- Micro USB Port Charging Support
1*Spryte AIO Vape Kit
2*Extra Coil Heads(1PC 1.8ohm Regular BVC & 1.2ohm For Nic Salt)
1*Micro USB Cable
Note: please ensure you have basic knowledge on how to properly to use it.
1)If the tanks use sub ohm coils, vapers must be sure that your device and batteries can handle sub ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub ohm tank. the tank only work with the mod that can support the atomizer and coil.if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm.improper use and lead to injury or damage.use the OHMS LAW Calculator to check.if you have question,please feel free to contact us.
2)if the coils are sub ohm coils, the user should be sure that the tank and mods can handle the sub ohm resistance coils, please make sure you have the great understanding of them, if you are not sure, please do not order and use, welcome contact us any time to get help.
3)users need pay attention to Li-ion cells when vaping.the batteries very sensitive to charging characteristics and may explode or burn if mishandled.so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave charging battery unattended.we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers.the device always recommend work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.
4) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of batteries.welcome to contact us anytime to get help.