Out Of Stock
  • 15 or more $61.19
  • 30 or more $59.95
Reward Points: 69
  • Brand: Joyetech
  • Product Code: Cuboid Pro Mod


Cuboid pro is the newest joyetech 200w TC box mod, this advanced and powerful box mod powered by 2pcs 18650 batteries and max output 200watts, fashionable and ergonomic design, five fashionable colors available. supports resistance as low as 0.05ohm under temp control mode, different output modes switchable. the new joyetech box mod with one large 2.4inch TFT colorful screen, easy to access menu system on a fully responsive touchscreen, adopts interactive friendly user interface, which is convenient and easy to set the vaping setting. simply tap the cloud icon on the upper right to switch the modes, click "+" and "-" to adjust the wattage or temperature, screen lock and unlock, steam on/off, slide to switch, down button,wallpaper, working modes, system setting, puff and pedometer, current mode, battery bar, up button, battery indication etc. the cuboid pro also can help to track and control your daily puffs.comes with the pedometer function with which is records your daily activity. the side comes with the tap button with TAPTEC technology, simply tap it and fire. the exquisite spring loaded 510 connectors on the cuboid pro is applicable for tanks with 510 lengths ranged at 4.0mm to 5.5mm, compatible with the tank up to 25mm diameter. the bottom micro USB port only recommends upgrading the firmware, if you want to charge the battery, better use one battery charger. if you want to order the full kit, please check the cuboid pro with procore aries starter kit here.



  • Material: zinc alloy
  • Colors: silver, black, red, yellow, blue
  • Size: 85*30*56mm
  • Screen: 2.4inch TFT/CTP screen
  • Screen resolution: 320*240dpi
  • Output wattage: 1-200W
  • Output modes: VW/VT(NI, TI, SS316)/TCR(M1, M2, M3)
  • Resistance range: 0.05-1.5ohm(VT/TCR)/0.1-3.5ohm(VW)
  • Temp control range: 100-315C/200-600F
  • Battery: 2pcs 18650
  • Thread: 510 spring loaded connector
  • Max charging current: 2.0A
  • Max output current: 50A
  • Max output voltage: 9V
  • The interactive friendly user interface
  • Wallpaper display supported
  • Pedometer function records your daily activity
  • Tap button with TAPTEC technology
  • Firmware upgradeable



1*cuboid pro mod

1*QC USB cable

1*user manual

1*warranty card

1*warning card

Note: please ensure you have basic knowledge on how to properly to use it.

1)users need pay attention to Li-ion cells when vaping.the batteries very sensitive to charging characteristics and may explode or burn if mishandled.so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave charging battery unattended.we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers.the device always recommend work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.

2) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of batteries.welcome to contact us anytime to get help.

Write a review

Note: HTML is not translated!
Bad           Good