Sinuous FJ200 is the newest wismec TC box mod, made of high-quality zinc alloy material, four fashionable colors available, the new wismec box mod built-in 4600mah battery, max output 200watts, supports resistance as low as 0.05ohm under temp control mode, different working modes switchable. with 2A max quick charging function, simply charge the sinuous FJ200 by connecting it with computer or wall adapter via USB cable, the temperature protection system for safer charging, it will improve the safety performance of charging effectively. the wismec mod with a 1.3inch large screen which will present all parameters in more clear way. the innovative design of centered 510 connectors is a big plus to sinuous FJ200, can hold tanks up to 28mm, recommend works with TFV8 x-baby, wismec divider etc. the side hidden fire button with green indicator light, makes it easy to fire up. two sets of circuit protection system are applied, realizing the overall protection of over-charging,over-current and over-discharging. the firmware of wismec sinuous FJ200 upgradeable can set the timeout duration to your preference.
- Material: zinc alloy
- Colors: Black, Blue, Red, Bronze
- Size: 77*45*29mm
- Thread:510 spring loaded connector
- Output modes: VW/TC-NI/TC-TI/TC-SS/TCR
- Output wattage: 1-200W
- Built-in 4600mAh battery
- Resistance range: 0.05-1.5ohm(TC)/0.1-3.5ohm(VW)
- Temp control range: 100-315C/200-600F
- Max charging current: 2A
- Max output current: 50A
- Output voltage range: 0.5-9.0V
- 1.3Inch OLED screen
- Temperature protection system for safer charging
- Hidden fire button with green indicator light
- 2A max quick charging function
- Dual circuit protection
- Over-charging protection
- Over-current protection
- Over-discharging protection
- Firmware upgradeable
1*sinuous FJ200 mod
1*QC USB cable
Note: please ensure you have basic knowledge on how to properly to use it.
1)users need pay attention to Li-ion cells when vaping.the batteries very sensitive to charging characteristics and may explode or burn if mishandled.so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave charging battery unattended.we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers.the device always recommend work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.
2) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of batteries.welcome to contact us anytime to get help.