The Vandy Vape Berserker S(BSKRS) MTL Vape Pen, with the super-compact all-in-one structure and portable design, comfortable to hold in your hand and pocket-friendly. the Vandy Vape BSKRS Kit integrates 1100mah battery and max output 25watts, it supports the resistance value of coils low to 0.6ohm. vapers can choose the bypass or constant voltage working modes. the Berserker S Kit with a single physical button to operate it. the firing button integrates the intelligent LED indicator light, it will indicate the charging status and warn the low battery level. can charge the battery via the micro USB port. the BSKRS Kit can hold 2ml e-juice, the bottom of the atomizer with 6 different size airflow holes for the real MTL experience like a real cigarette tightening. there are two new coil heads available: the 0.7ohm mesh coil and 1.5ohm regular coil, compatible with regular e-juice, nicotine salts and CBD. the Vandy Vape Kit with convenient top e-juice refill design simply screws out the top cap to reveal the large filling holes, easy to inject your favorite e-juice without leaking.
- Material: Food-Grade PSU + Stainless Steel
- Size: 96*22mm
- Super Compact & Portable AIO Vape Pen
- Max Output Power 25W
- Working Voltage: 3.2-4.2V
- Working Current: <8A
- Output Voltage: 2.8-4.0V
- Coil Resistance Range: 0.6-3.0ohm
- Output Modes: Bypass Mode, Constant Voltage Mode
- Standby Current: <15uA
- Battery Capacity: 1100mAh
- Intelligent LED Indicator Light
- Micro USB Port For Charging
- 2ML E-Juice Capacity
- 0.7ohm Mesh Coil, 5-25W
- 1.5ohm Regular Coil, 7-15W
- Bottom With 6 Different Size Airflow Holes: 1.8mm, 1.8mm, 1.4mm, 1.1mm, 0.8mm, 0.8mm
- Convenient Top E-Juice Refill Design
1*Spare Parts Bag
1*0.7ohm Mesh Coil
1*1.5ohm Regular Coil
1*QC USB Cable
Note: please ensure you have basic knowledge on how to properly to use it.
1)If the tanks use sub-ohm coils, vapers must be sure that your device and batteries can handle sub-ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub-ohm tank. the tank only works with the mod that can support the atomizer and coil. if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm. improper use and lead to injury or damage. use the OHMS LAW Calculator to check. if you have a question, please feel free to contact us.
2)users need to pay attention to Li-ion cells when vaping. the batteries very sensitive to charging characteristics and may explode or burn if mishandled. so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave a charging battery unattended. we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers. the device always recommends work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.
3) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods. please have a basic knowledge of batteries. Welcome to contact us anytime to get help.